
Architectural asphalt shingles
Layered asphalt shingles offer a textured roof surface and a broad range of colors. Underlayment, starter strips, ventilation and flashing still determine how the roof functions.
Compare shingle optionsReplacement makes sense when the roof has reached the point where repeated repairs leave the broader problem behind. That can mean widespread shingle wear, several failing details or a covering that cannot be worked with reliably. The decision rests on condition, not age alone.
A replacement is also the opportunity to address the details that will sit beneath the new surface. Removing the old roof exposes the deck and makes it possible to connect underlayment, flashing, edges and ventilation as one system. The material choice should fit the roof, the building and the budget.
Request a roof inspection
These layers and connections determine how the finished roof works, even though the shingles get most of the attention.
The old covering is removed according to the project scope. The exposed deck is checked for a sound nailing surface; damaged areas need repair before new roofing goes on.
Underlayment, roof edges, valleys and flashing are installed together so the layers shed water in the right direction. Penetrations need compatible boots and flashings.
Shingle or metal specifications, slope, fastening and ventilation need to work with the building. Adding an exhaust vent without intake is not a complete ventilation plan.
Material staging, landscaping, drive access and debris removal belong in project planning. Hidden damage discovered during removal changes the work and needs to be explained before the new covering hides it.
Choose the material after the roof and the project constraints are understood.

Layered asphalt shingles offer a textured roof surface and a broad range of colors. Underlayment, starter strips, ventilation and flashing still determine how the roof functions.
Compare shingle options
Panel profile, attachment, movement and flashing details change both the appearance and the installation. Standing seam and exposed-fastener systems deserve different maintenance conversations.
Explore metal roofingRoof measurements, condition and access establish the starting scope. Visible trouble spots are considered alongside the wider roof.
The roof covering, flashing, deck allowance, ventilation and cleanup are brought into one project plan.
Work areas, deliveries and property access are coordinated around the building. The tear-off exposes conditions that could not be seen from above.
New layers, coverings and details complete the planned work. Contractor-specific warranty and payment terms belong with that project agreement.
For Oklahoma architectural asphalt replacement, a supported planning range is $4.50 to $7.50 per measured roof square foot for a 1,500 to 3,000 square foot roof under the stated assumptions.
Use the roof cost calculatorRead the roof cost guideArchitectural asphalt, moderate complexity, normal access, one existing layer and a usable deck. Structural repairs, damaged decking, unusual access and specialty work are separate.
Steeper slopes, more valleys or wall joints, disposal conditions and hidden deck repairs change the work. The planning figure becomes a project price only after the property and scope are assessed.
No. Sound decking can remain when it meets the needs of the new system. Damaged or unsuitable sections need correction after the old covering is removed.
A recover is not interchangeable with tear-off. Existing layers, deck condition, the applicable code and the product instructions affect whether it is allowed and useful. Removal lets the deck and hidden details be assessed directly.
Material and workmanship coverage are separate. Product terms and the installing contractor’s agreement define the coverage, conditions and exclusions for the actual project.
Guthrie lists roofing among work requiring a permit. The permit guide explains the city process and the inspection-scheduling detail that needs current confirmation.

Guthrie Roofing Co
Tell us what has you considering a new roof. Start with a free inspection and a conversation about the options.
(405) 877-1967